ABB FDNA-01 Manual de usuario descargar pdf (Pagina 31)

Drive configuration

1 FBA TYPE

This parameter shows the fieldbus adapter type as detected by

the drive. The value cannot be adjusted by the user.

If this parameter is undefined, the communication between the

drive and the module has not been established.

2 MAC ID

Each device on the DeviceNet network must have a unique MAC

ID number. This parameter is used to define the MAC ID number

for the drive it is connected to.

3 BAUD RATE

Sets the baud rate for the DeviceNet interface. This is user

selectable, but must be the same on every node on the DeviceNet

network.

5 ODVA STOP FUNC

This parameter only applies when using the ODVA AC/DC Drive

Profile. It determines how the motor will be stopped when a stop

command is received via DeviceNet

0 = Ramp stop: the motor decelerates along the active

deceleration ramp.

1 = Coast stop: the motor comes to a stop by coasting.

6 OUTPUT INSTANCE

8 INPUT INSTANCE

These parameters configure the output and input assembly

instances used by the DeviceNet Adapter Module. The following

tables list supported assemblies and allowed combinations. For

descriptions of assembly instances, see Communication -

Assembly Objects.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 113 114

Sin comentarios

ABB FDNA-01 Manual de usuario Pagina 31