ABB FDNA-01 Manual de usuario descargar pdf (Pagina 39)

Master configuration

Overview

This chapter gives information on configuring the DeviceNet

master station for communication through the FDNA-01

DeviceNet Adapter module.

Configuring the system

After the FDNA-01 DeviceNet Adapter module has been

mechanically and electrically installed according to the instructions

in previous chapters, and has been initialized by the drive, the

master station must be prepared for communication with the

module.

Please refer to the Scanner documentation for information on

configuring the system for communication with the FDNA-01.

EDS files

Electronic Data Sheet (EDS) files specify the properties of the

device for the DeviceNet scanner. The device is identified by the

DeviceNet scanner by means of the Product Code, Device Type,

and Major Revision (See Identity Object 01h).

To enable the use of different ABB drive types on the same

DeviceNet network, a unique Product Code has been given to

each drive type and application combination.

EDS files are available from your ABB representative.

Note: Only one EDS file with the same DeviceNet Product Code

can be installed in the PLC at a time.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 113 114

Sin comentarios

ABB FDNA-01 Manual de usuario Pagina 39