ABB FPBA-01 Manual de usuario descargar pdf (Pagina 34)

Drive configuration

Table 4. FPBA-01 configuration parameters – Group 1

Note: Set also the extended Parameter Data (see SAP 61 in the

chapter Communication) to ensure proper operation of the

FPBA-01 with the drive.

1 FBA TYPE

This parameter shows the fieldbus adapter type as detected by

the drive. The value cannot be adjusted by the user.

If this parameter is undefined, the communication between the

drive and the module has not been established.

2 NODE ADDRESS

Each device on the PROFIBUS network must have a unique node

number. This parameter is used to define a node number for the

drive it is connected to.

Par.

no.

Parameter name Alternative settings Default

setting

1 FBA TYPE (Read-only) PROFIBUS DP

2 NODE ADDRESS 0 to 126 3

3 BAUD RATE* (12000) 12 Mbit/s; (6000) 6 Mbit/s;

(3000) 3 Mbit/s; (1500) 1.5 Mbit/s;

(500) 500 kbit/s; (187) 187.5 kbit/s;

(93) 93.75 kbit/s; (45) 45.45 kbit/s;

(19) 19.2 kbit/s; (9) 9.6 kbit/s

1500

4 TELEGRAM TYPE* (1) PPO 1; (2) PPO 2; (3) PPO 3;

(4) PPO 4; (5) PPO 5; (6) PPO 6;

(7) STD1; (8) STD20

(Read-only)

(1) PPO 1

5PROFILE (0) PROFIdrive; (1) ABB Drives;

(2) Transparent 16;

(3) Transparent 32

(1) ABB Drives

6 T16 SCALE 1 to 65535 100

*The value is automatically updated (Read-only).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Sin comentarios

ABB FPBA-01 Manual de usuario Pagina 34