ABB RCNA-01 Manual de usuario descargar pdf (Pagina 247)

100

101

Parameter listing and descriptions 243

ACH550-01 User's Manual

3011 STALL FREQUENCY 0.5…50 Hz

This parameter sets the frequency value for the Stall function. See the

figure for parameter 3010.

3012 STALL TIME 10…400 s

This parameter sets the time value for the Stall function.

3017 EARTH FAULT 0=DISABLE, 1=ENABLE

Defines the drive response if the drive detects an earth fault in the motor

or motor cables.

0 =

DISABLE – No response

1 =

ENABLE – Displays a fault (16, EARTH FAULT) and the drive coasts to

stop.

Note: Disabling earth fault may void the warranty.

3018 COMM FAULT FUNC 0…3

Defines the drive response if the fieldbus communication is lost.

0 =

NOT SEL – No response

1 =

FAULT – Displays a fault (28, SERIAL 1 ERR) and the drive coasts to

stop.

2 =

CONST SP 7 – Displays an alarm (2005, IO COMM) and sets the speed

using 1208

CONST SPEED 7. This “alarm speed” remains active until

the fieldbus writes a new reference value.

3 =

LAST SPEED – Displays an alarm (2005, IO COMM) and sets the speed

using the last operating level. This value is the average speed over

the last 10 seconds. This “alarm speed” remains active until the

fieldbus writes a new reference value.

WARNING! If you select

CONST SP7, or LAST SPEED, make sure that

continued operation is safe when the fieldbus communication is lost.

3019 COMM FAULT TIME 0…600.0 s

Sets the communication fault time used with 3018

COMM FAULT FUNC.

• Brief interruptions in the fieldbus communication are not treated as

faults if they are less than the

COMM FAULT TIME value.

3021 AI1 FAULT LIMIT 0…100%

Sets a fault level for analogue input 1. See 3001

AI<MIN FUNCTION.

3022 AI2 FAULT LIMIT 0…100%

Sets a fault level for analogue input 2. See 3001

AI<MIN FUNCTION.

Code Description Range

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 473 474

Comentarios a estos manuales

Sin comentarios

ABB RCNA-01 Manual de usuario Pagina 247

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control ABB RCNA-01