ABB FPBA-01 Manual descargar pdf (Pagina 60)

Starting up fieldbus communication and programming the ABB PLC (one-drive system)

16. Name the signals. In this example configuration, Input 1 is named field_in1 and

Output 1 field_out1.

Note: You can name all signals here and they will be automatically in use in the

Control Builder.

17. Check that the PLC is in the Stop state (Stop in the display).

Note: The downloading is not possible if the PLC is in the Run state.

18. Download the communication configuration to the PLC: first, right-click the CM572-

DPM icon and, then click Download.

Tool/Step

Setting up the communication

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 133 134

Sin comentarios

ABB FPBA-01 Manual Pagina 60